Z Corp. System Software
2.3.9 COLOR PARTS
The color option is only available when the
System Software is connected to a Z Corp.
Color Printer – Z402C, Z406, or Z810 3D
Printer.
You may color your monochrome stl part.
1. Select the part.
2. Choose ‘Color’ option under the Edit menu.
3. Pick a color from the color pallet or choose
to define a custom color.
4. Click ‘OK’.
The part will be colored by an outer shell as with
all Z Corp. color parts.
2.3.10 ANISOTROPIC SCALING
• Anisotropic scaling factors may vary
for different types of geometries and
powders. The software allows you to
set anisotropic scaling factors for the
build or for a specific part.
• To change anisotropic scaling factors
to affect the entire build, change the
powder parameters under 3D Print
Setup. For more information, see the
User Manual for your printer.
• In some circumstances, you may need
to change your scaling factors for an
individual part. To change anisotropic
scaling factors for a specified part,
choose the part and select the
‘Anisotropic Scaling’ option under the
Transform menu. Enter your custom
anisotropic scaling factors for the x, y,
and z axis. Click ‘OK’. These anisotro-
pic scaling factors will only affect the
selected part(s).
PLEASE NOTE: Before changing anisotro-
pic scaling factors for specific parts, make
sure anisotropic scaling factors have been
set for the entire build.
PLEASE NOTE: Only monochrome
files (STL) may be colored. If you
select a color part, the software will
remind you that the color feature is
only available for monochrome files.
www.zcorp-users.com
19
Comments to this Manuals