Z Corporation Z 406 User Manual download pdf (Page 91)

ZPrint™ Software Manual Service Menu

11/30/09

Prime Wash Line. Select to push wash fluid through the fluid lines when you first start up your Printer

or when you have run out of wash fluid.

Stripe Test. Select to print a stripe test to check the functionality of the print heads.

Toggle Roller On/Off. (Shortcut Key: F4) Select to activate the roller independently for easy cleaning.

Check Status. (Shortcut Key: F1) Checks how much powder is in the Feed Piston, the remaining

room in the Build Bed, and the ZPrint Firmware version.

Print Head Report. Select to view a report of the number of mL printed, temperature levels, and flow

rates for the current print heads.

View Printer Log. Select to view the printer log that records historical printer performance.

Upload New Firmware. Select to upgrade the Firmware for your 3D Printer. Contact your local service

provider, who will provide you with any required upgrades and instructions for installing. Or, check for

updates on the Support section of our Web site: zcentral.zcorp.com.

Upload New Printer Configuration. Select to replace the entire .ini file in the printer. Please only use

under the instruction of the Z Corporation Service Department, or an authorized Service Representa-

tive.

Edit .INI File, Send File and Receive File. These features are used during diagnosis. They should

only be modified under the instruction of the Z Corporation Service Department, or an authorized Ser-

vice Representative.

9.2 Z810 Service Menu

Only those items not referenced above are described for the Z810 Service menu.

Alignment. Select to align the print heads after changing them. For additional details, see the Z810

Hardware Manual.

Change Binder Supply. Select to change between color and monochrome binder systems.

Flush Binder. This feature allows you to cycle fluid through the plumbing system, which is useful in

changing the binder color or binder type, as described in detail in the Z810 Hardware Manual.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 97 98 99

No comments

Z Corporation Z 406 User Manual Page 91