Z Corporation Z 406 User Manual download pdf (Page 23)

ZPrint™ Software Manual EZ Print For ZPrinter 310 Plus/DESIGNmate Mx

11/30/09

3 EZ Print For ZPrinter 310 Plus/DESIGNmate Mx

EZ Print will print a single part using the settings for your default materials. It’s the quickest and simplest

way to get printing.

EZ Print mode can only be used with the ZPrinter 310 Plus/DESIGNmate Mx printer.

• Ensure the Firmware is version 10.138 or higher. Please visit the Printers section of our Web site

and click on the link for your printer type for more information regarding Firmware:

zcentral.zcorp.com

3.1 Using EZ Print

EZ Print is useful for users who may need assistance in building a part. EZ Print automates some func-

tions and eliminates the need for the user to manually setup the part prior to printing. Check the EZ Print

checkbox when you select a file from the Open dialog box, or select EZ Print mode at anytime from the

Settings > General Preferences > General tab dialog.

1. Select File > Open to display the Open dialog.

2. Select a file and check the EZ Print checkbox to continue in EZ Print mode. Click Open.

• If you are opening a .zbd file, the software will omit generating a Fixture and show the Ready to

Print dialog, (shown in Step 7).

•If you are opening a .zbd file and the default powder is not the material associated with your

printer type, the software will give you the option to either:

•Proceed with the current powder settings

•Proceed with the default powder settings

•Cancel out of EZ Print mode

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 98 99

No comments

Z Corporation Z 406 User Manual Page 23