Z Corporation Z 406 Owner's Manual download pdf (Page 5)

Z Corp. System Software

1.2 INSTALLING THE Z CORP. SYSTEM SOFTWARE

1. Close all open applications on your computer, make sure Windows NT 4.0, or 2000

Professional Operating System is running and insert the Z Corp. System Software CD into

your CD-ROM drive.

2. If the installer does not start automatically, double-click on your CD-ROM drive and then

double-click on the ‘Setup.exe’ icon. This will start the setup sequence.

3. Read the licensing agreement carefully.

4. Select destination directory. The program will prompt you for a selection and will offer

C:\Program Files\ZCorp System Software as the default directory.

Choose your installation preference: typical (recommended), compact or custom. Once you have

made your selection, it may take several minutes to install the program. When complete, you will

be returned to your main window. If you encounter any problems during installation, please

contact the Z Corporation Service Department at (781) 852-5050, (877) 88-ZCORP, or via email

WARNING: To avoid problems that may occur during printing, ensure that all screen savers and your

power management software are turned off on the computer driving the Z Corp 3D Printer. Most

screen savers and power management software can be turned off in the main Windows screen

settings. For additional instructions on how to disable your hardware and software power management,

please consult your computer hardware owner’s manual.

www.zcorp-users.com

1 2 3 4 5 6 7 8 9 10 ... 31 32

No comments

Z Corporation Z 406 Owner's Manual Page 5