Z Corporation Z 406 Owner's Manual download pdf (Page 27)

Z Corp. System Software

www.zcorp-users.com

3.3 Z810 SYSTEM SERVICE MENU

When connected to a Z810 3D Printer, the 810Service menu

will be an option.

• Purge Print Heads. Use this feature after changing the print heads and printing the

alignment test. This runs binder through the print head, replacing the HP ink with

binder as described in the User Manual.

• Alignment. This feature is used to align the print heads after changing them as

described in detail in the User Manual.

• Change Binder Supply. This feature allows you to change between color and

monochrome binder systems.

• Unpark. This feature allows you to unpark the carriage to allow for cleaning the

Service Station.

• Bleed Air. This function allows you to remove air from the fluid system. This feature is

only used when air has entered your fluid system due to binder shortage when

printing. Use this feature only with the guidance of the Z Corporation Service

Department or authorized Z Corporation service provider.

• Print Head Report. This feature allows you to view the number of pixels printed,

temperature levels, and flow rates of the current print heads.

• View Log. This feature allows you to view the printer log, which records historical

printer performance.

• Edit .INI File, Send File and Receive File. These features are used during diagnosis. They

should be used under the instruction of the Z Corporation Service Department or authorized

Service representative.

• Fill Bed. Prepares the build to print by filling the bed with powder. It is the equivalent

of pushing the ‘Fill Bed’ option on the printer control panel.

• Empty Overflow. This feature allows you to empty the overflow bin before each

build.

• Spit on Deck. This feature allows you to test the print quality of your print heads.

This feature is used after changing print heads. But can also be used when your print

heads have reached a high pixel count.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

No comments

Z Corporation Z 406 Owner's Manual Page 27